Water leakage is a problem that most home owners are likely to encounter at one point or another. It's also something that most homeowners are able to detect themselves, and subsequently remedy by closing off the water source. But what exactly is water leak detection? Water leak detection, commonly called water alarm, is a noninvasive system of detecting water leak problems in residential and commercial buildings. An automatic water shut-off system detects potential water leaks through either passive monitoring by monitoring existing water levels in the pipes or by detecting water leaking on the ground. When water is detected, the shutoff valve is automatically forced to shut off the water supply for the property.
While it is generally more expensive to install a water leak detection system designed specifically to detect leaks in plumbing pipes, there are some systems on the market that are certified to detect leaks anywhere in any given building. These specific types of systems are generally a little more costly than the ones that are certified to detect general water leaks. If you have a specific building that you are concerned about, make sure to do a bit of research before purchasing one of these specialized systems. The specialized systems which are certified to detect specific water leaks are typically made from high quality materials, and are built with specific mechanisms in place to prevent other water leaks from occurring. View here for more important info on how water leak detection system works.
A key benefit to certified water leak detection systems is the reduction of water losses. With a water loss, there is increased cost to replace expensive equipment or materials, which results in higher water bills. With a leak detection system, all water losses are immediately detected, which allows businesses or residences to quickly reduce water consumption to minimal levels, allowing for savings in both money and energy consumption.
Another key benefit to certified whole house water leak detection systems is the prevention of water damage to nearby structures and properties. Water damage can result in structural damage to buildings and neighboring homes. This water damage can also cause further mold growth within the affected structure, which further increases the costs associated with water damage repair and restoration. If your building is located within a wooded area, a wood rot problem can occur if a water leak is not detected and repaired immediately. A certified water leak detection system will alert you to potential water damages which should prompt repair efforts to prevent further structural damage.
In addition to the preventive benefits of water leak detection systems, there are also some benefits to using these specific devices. Tracer gases can help to pinpoint the location of leaks, helping to quickly locate the source of leaks. Tracer gas sensors come in various sizes to easily match with any size of leak, and they are available in kits for both home use and commercial applications. These sensors utilize a small amount of current to activate the sensor, sending a radio signal out to let you know of an open or closed flow. These devices can be mounted on the outside walls of a house or building, in basements, or anywhere else where you may experience water leaks.
Traced gases are also available to help with other types of water leaks, including those found in pipes. Pipes that contain water can often leak at different rates, depending on how much weight is placed on them or how fast water flows through them. A zone water leak alarm type sensor will be able to detect these leaks before damage occurs to surrounding pipes, causing more damage. These are especially useful in older houses or buildings, as older pipes may not be equipped with these types of sensors. For more understanding of this article, visit this link: https://en.wikipedia.org/wiki/Leak_detection.
